Transking Compliance Certification
Compliance Certification
Compliance and Certification of the the Transking Tightwinder (Truck Winch / Loadbinder) was undertaken by Consulting Engineer firm R.K. Findlay Pty Ltd.
Extract
This letter is to confirm that the load binder manufactured and designed by your company Transking Innovations P/L has been tested to the relevant requirements of AS/NZS 4380:2001 Cargo Restraint Systems, and is covered in the test report number; TILB4T_02.
A load of 1.25 times the lashing capacity (LC) (5000kgs) was applied to the new 18 tooth binder without permanent deformation or failure. The binder continued to function as intended when the load was released.
Therefore with an LC of 4000 kgs the under body load binder meets the relevant requirements of AS/NZS 4380:2001.
R. K. FINDLAY PTY LTD
CONSULTING ENGINEERS
The testing of the under body load binder was conducted in accordance with AS/NZS 4380:2001 Motor vehicle-Cargo restraint system-Transport webbing and components.
When the load of 1.25 x LC and beyond was applied to the load binder no permanent deformation or failure occurred and the continued to operate as normal. The load was then increased to above 7700 kgs, which resulted in permanent deformation but continued to hold the load without failure.
The load binder also conformed to the requirements of A3.3 and A3.4 for pretension and release under tension.
An extra load of 100kgs was also applied (51kgs is only required) and the load binder continued to function as intended.
R. K. FINDLAY PTY LTD
CONSULTING ENGINEERS
